|
|
|
EFALONâ
|
|
In valve sets and
mills conveying chemicals, steam, hot oil, water,
oxygen, LPG, coal gas, cooling gases and similar corrosive materials, Efalon® (PTFE)
is used for absolute sealing. Very low coefficient of friction of Efalon® (PTFE)
and its non-stick characteristic help reduce the force necessary to turn on and off the
valve to a minimum. Efalon® (PTFE) valve sets and mill compression packings are
hygienic, economical and durable.
Some application areas:
-
Sealing elements
such as gaskets, seals, V-Rings, O-Rings, compression packings, tapes,
valve sets etc.
-
Tubes, components
of joints, valves and pump covers
-
Boiler, reactor
covers
-
Mixers
Equipment lined with
Teflon® (tubes, T elbows, tanks etc.)
are widely used in refineries and petrochemical facilities.
Efalon® (PTFE) lining combines perfect heat and
chemical resistance of PTFE with resistance of steel. The fact
that nothing sticks onto Efalon® (PTFE) helps keep
pipes clean and prevents clogging whereas the fact that it is a good insulator
prevents freezing of chemicals in pipe lines and keeps them unaffected by
external conditions.
Efalon® (PTFE) lined products produced by
Polikim have been functioning in many facilities without
any problems for many years. Polikim pays utmost attention to the
packaging and delivery of its lined products. Lined
products are protected by special coverings so that flanges are not damaged during
delivery and
stocking and external steel pipe is painted with
protective paints.
|
|
|
|
KESTAMIDâ |
|
Kestamid® is an engineering
plastic used commonly for its superior mechanical, physical, chemical
and electrical properties. It is replacing aluminum, copper, bronze,
steel, fiber, brass and other metals in many applications with superior
advantages as
it is lightweight, resistant to corrosion, impact, wear, sea water and
sunlight and operates silently
without lubrication.
Making use of techniques specific to production of
Kestamid® and mechanical resistance of metals, it is possible to make
gears with steel core, pulleys, mixer rotors or produce Nylon® cylinders
with steel mills. |
|
|
|
